当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > FreeBSD双线负载均衡NAT服务器配置方法

Unix/Linux
怎样设置一个档案来作为 linux 的转换空间?
全文替换以修改档案方法
如何删除档案中的重复的行
/dev下 cua*被删除,该如何恢复?
/dev/tty0不见了怎麽救回来?
Linux 网管 123 --- 第4章. 安装及硬体组态 - 2.启动 Linux 安装
Linux 网管 123 --- 第4章. 安装及硬体组态 - 3.分割硬碟机
Linux 网管 123 --- 第4章. 安装及硬体组态 - 4.设定Swap格式化Pa
Linux 网管 123 --- 第4章. 安装及硬体组态 - 5.选择想要安装的套件
Linux 网管 123 --- 第4章. 安装及硬体组态 - 6.硬体组态
Linux 网管 123 --- 第4章. 安装及硬体组态 - 7.从 LILO 启动
Linux 网管 123 --- 第4章. 安装及硬体组态 - 8.下载及安装 Red H
Linux 网管 123 --- 第5章. 组态 X Window 系统 -1.使用 X-
Linux 网管 123 --- 第5章. 组态 X Window 系统 -2.使用 X
Linux 网管 123 --- 第5章. 组态 X Window 系统 -3.改善X下的
Linux 网管 123 --- 第5章. 组态 X Window 系统 -4.选择 X
Linux 网管 123 --- 第5章. 组态 X Window 系统 -5.GNOME
Linux 网管 123 --- 第5章. 组态 X Window 系统 -6.KDE 的
Linux 网管 123 --- 第6章. 一般系统管理问题 -1.Root 帐号
Linux 网管 123 --- 第6章. 一般系统管理问题 -2.建立使用者帐号

Unix/Linux 中的 FreeBSD双线负载均衡NAT服务器配置方法


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2010-01-15   浏览: 151 ::
收藏到网摘: n/a

# vi /etc/rc.conf
================+==============+=================
defaultrouter="221.33.88.254"
ifconfig_fxp0="inet 192.168.0.1 netmask 255.255.255.0"
ifconfig_rl0="inet 221.33.88.2 netmask 255.255.255.0"
ifconfig_rl1="inet 202.0.57.1 netmask 255.255.255.0"
pf_enable="YES"
================+==============+================= # vi /etc/pf.conf
================+==============+=================
##anchors
lan_net = "192.168.0.0/24"
int_if  = "fxp0"
ext_if1 = "rl0"
ext_if2 = "rl1"
ext_gw1 = "221.33.88.254"
ext_gw2 = "61.0.57.254" ##nat outgoing connections on each internet interface
nat on $ext_if1 from $lan_net to any -> ($ext_if1)
nat on $ext_if2 from $lan_net to any -> ($ext_if2) ##default deny
block in  from any to any
block out from any to any ##pass all outgoing packets on internal interface
pass out on $int_if from any to $lan_net
##pass in quick any packets destined for the gateway itself
pass in quick on $int_if from $lan_net to $int_if
##load balance outgoing tcp traffic from internal network.
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto tcp from $lan_net to any flags S/SA modulate state
##load balance outgoing udp and icmp traffic from internal network
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto { udp, icmp } from $lan_net to any keep state ##general "pass out" rules for external interfaces
pass out on $ext_if1 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if1 proto { udp, icmp } from any to any keep state
pass out on $ext_if2 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if2 proto { udp, icmp } from any to any keep state ##route packets from any IPs on $ext_if1 to $ext_gw1 and the same for
##$ext_if2 and $ext_gw2
pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from $ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any
================+==============+================= # vi /etc/sysctl.conf
net.inet.ip.forwarding=1