当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > FreeBSD双线负载均衡NAT服务器配置方法

Unix/Linux
Linux命令Man解释:useradd:帐号建立或更新
Linux 网管 123 --- 第7章. 自订的组态及管理内容 -7.使用 Linuxc
Linux 网管 123 --- 第8章. 备份及回存程序 -1.伺服器备份程序
Linux 网管 123 --- 第8章. 备份及回存程序 -2.伺服器回存程序(tar.
Linux 网管 123 --- 第8章. 备份及回存程序 -3.Cisco 路由器组态备
Linux 网管 123 --- 第9章. 各种杂项管理工作 -1.检查储存空间
Linux 网管 123 --- 第9章. 各种杂项管理工作 -2.管理进程
Linux 网管 123 --- 第9章. 各种杂项管理工作 -3.进程的启动及停止
Linux 网管 123 --- 第9章. 各种杂项管理工作 -4.使用 Cron 及 C
Linux 网管 123 --- 第10章. 升级 Linux 及其他应用软体 -1.使用
Linux 网管 123 --- 1. 前言 2. 简介
Linux 网管 123 --- 第3章. 概观 Linux
Linux 网管 123 --- 第4章. 安装及硬体组态 - 1.建立一张安装磁片
轻轻松松的安装Slackware Linux -- 4.如何在硬碟建置Linux系统
轻轻松松的安装Slackware Linux -- 5.其他非标准安装程序解析
如何重新设定时区
Linux中有没有支援 Solairs x86 的档案系统?有的话要如何mount?
MBR如果被覆盖了怎麽办?
如何使用命令trap来捕捉信号?
如何进行增量备份?

Unix/Linux 中的 FreeBSD双线负载均衡NAT服务器配置方法


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2010-01-15   浏览: 150 ::
收藏到网摘: n/a

# vi /etc/rc.conf
================+==============+=================
defaultrouter="221.33.88.254"
ifconfig_fxp0="inet 192.168.0.1 netmask 255.255.255.0"
ifconfig_rl0="inet 221.33.88.2 netmask 255.255.255.0"
ifconfig_rl1="inet 202.0.57.1 netmask 255.255.255.0"
pf_enable="YES"
================+==============+================= # vi /etc/pf.conf
================+==============+=================
##anchors
lan_net = "192.168.0.0/24"
int_if  = "fxp0"
ext_if1 = "rl0"
ext_if2 = "rl1"
ext_gw1 = "221.33.88.254"
ext_gw2 = "61.0.57.254" ##nat outgoing connections on each internet interface
nat on $ext_if1 from $lan_net to any -> ($ext_if1)
nat on $ext_if2 from $lan_net to any -> ($ext_if2) ##default deny
block in  from any to any
block out from any to any ##pass all outgoing packets on internal interface
pass out on $int_if from any to $lan_net
##pass in quick any packets destined for the gateway itself
pass in quick on $int_if from $lan_net to $int_if
##load balance outgoing tcp traffic from internal network.
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto tcp from $lan_net to any flags S/SA modulate state
##load balance outgoing udp and icmp traffic from internal network
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto { udp, icmp } from $lan_net to any keep state ##general "pass out" rules for external interfaces
pass out on $ext_if1 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if1 proto { udp, icmp } from any to any keep state
pass out on $ext_if2 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if2 proto { udp, icmp } from any to any keep state ##route packets from any IPs on $ext_if1 to $ext_gw1 and the same for
##$ext_if2 and $ext_gw2
pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from $ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any
================+==============+================= # vi /etc/sysctl.conf
net.inet.ip.forwarding=1