繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- Linux中NE2000兼容网卡的安装
- sis650显卡驱动自定义安装终极指南(RH80)
- 配置好显卡驱动Linux下玩游戏同样爽
- linux设备驱动笔记：字符设备驱动
- 把设备驱动程序编译进嵌入式Linux内核
- 删除Linux引导界面的方法及注意事项
- 在Linux操作系统下如何开启硬盘DMA
- 从Linux BIOS的起源 看未来主板框架
- 深入浅出 Linux字符设备驱动程序解析
- Linux系统启动引导程序配置文件解析
- 深入浅出 Linux设备驱动异步通知介绍
- 深入浅出 Linux设备驱动中断处理介绍
- 新手看招 Linux操作系统的目录结构一览
- 菜鸟乐园 Linux中常见文件系统格式介绍
- Motorola微处理器bootloader分析与应用
- 实用技巧 Linux系统的经典使用技巧八则
- Linux操作系统下IPTables配置方法详解
- Linux系统中增加Swap分区文件步骤方法
- 使用Openssh工具远程管理Solaris 10
- uClinux中添加用户应用程序的详细方法
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 185 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
