当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.

Unix/Linux
Linux 指令篇:系统设置--insmod
Linux 指令篇:系统设置--kbdconfig
Linux 指令篇:系统设置--lilo
Linux 指令篇:系统设置--liloconfig
Linux 指令篇:系统设置--lsmod
Linux 指令篇:系统设置--minfo
Linux 指令篇:系统设置--mkkickstart
Linux 指令篇:系统设置--modinfo
Linux 指令篇:系统设置--modprobe
Linux 指令篇:系统设置--moouseconfig
Linux 指令篇:系统设置--ntsysv
Linux 指令篇:系统设置--pwconv
Linux 指令篇:系统设置--pwunconv
Linux 指令篇:系统设置--rdate
Linux 指令篇:系统设置--resize
Linux 指令篇:系统设置--rmmod
Linux 指令篇:系统设置--rpm
Linux 指令篇:系统设置--set
Linux 指令篇:系统设置--setconsole
Linux 指令篇:系统设置--setenv

Unix/Linux 中的 Reinstall the boot manager.


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 189 ::
收藏到网摘: n/a

Windows killed my boot manager! How do I get it back?
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.