繁體中文当前位置: 首页 > 图文教程 > 网络编程 > ASP > dreamweaverMX通用分页代码研究
- ASP
- BytesToBstr获取的源码转换为中文的代码
- PostHttpPage用asp是实现模拟登录效果的代码
- asp下实现UrlEncoding转换编码的代码
- GetBody asp实现截取字符串的代码
- asp之GetArray提取链接地址，以$Array$分隔的代码
- DefiniteUrl asp将相对地址转换为绝对地址的代码
- ReplaceSaveRemoteFile 替换、保存远程图片 的代码
- ReSaveRemoteFile函数之asp实现查找文件保存替换的代码
- FormatRemoteUrl函数之asp实现格式化成当前网站完整的URL-将相对地址转换为绝对地址的代码
- ReplaceTrim 函数之asp实现过滤掉字符中所有的tab和回车和换行的代码
- CheckFile函数之asp实现检查某一文件是否存在的代码
- SaveRemoteFile函数之asp实现保存远程的文件到本地的代码
- FpHtmlEnCode 函数之标题过滤特殊符号的代码
- GetPaing 函数之asp采集函数中用到的获取分页的代码
- ScriptHtml 函数之过滤html标记的asp代码
- asp实现检查目录是否存在与建立目录的函数
- ShowPage 显示“上一页 下一页”等信息的封装代码
- JoinChar 向地址中加入 ? 或 & 用于实现传参
- CreateKeyWord asp实现的由给定的字符串生成关键字的代码
- Server.Execute方法执行指定的ASP程序
ASP 中的 dreamweaverMX通用分页代码研究
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-03 浏览: 245 ::
收藏到网摘: n/a
好了，进入正题，
我在以前做网页的分页时候都是用自己写的服务端脚本(我从不用ADO的分页)，用了MX后发现在这里面用分页太方便了，不过代码也有点太长了，大家看下面的代码就可以知道。用过之后我发现里面recordset 的cursortype设为0分页竟然可以正常工作！这令我吃惊不少，分析了代码之后才发现MX 是用了一种挺笨的方法实现的，效率很低，所以大家还是用1吧：）
分析如下:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="936"%>
<!--#include file="Connections/ncarcnn.asp" -->
<%
Dim Recordset1
Dim Recordset1_numRows
Set Recordset1 = Server.CreateObject("ADODB.Recordset")
Recordset1.ActiveConnection = MM_ncarcnn_STRING
Recordset1.Source = "SELECT * FROM dbo.ncarinfo"
Recordset1.CursorType = 0
'这里用0也可以正常运行，但是经过分析代码可以看出，用0的效率很低，建议用1
Recordset1.CursorLocation = 2
Recordset1.LockType = 1
Recordset1.Open()
Recordset1_numRows = 0
%>
<%
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'以下为分页代码
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = 10
Repeat1__index = 0
Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
%>
<%
' *** Recordset状态, 定义状态变量
Dim Recordset1_total
Dim Recordset1_first
Dim Recordset1_last
' set the record count
Recordset1_total = Recordset1.RecordCount
' set the number of rows displayed on this page
If (Recordset1_numRows < 0) Then
Recordset1_numRows = Recordset1_total
Elseif (Recordset1_numRows = 0) Then
Recordset1_numRows = 1
End If
' set the first and last displayed record
Recordset1_first = 1
Recordset1_last = Recordset1_first + Recordset1_numRows - 1
' if we have the correct record count, check the other stats 处理正确的rs
If (Recordset1_total <> -1) Then
If (Recordset1_first > Recordset1_total) Then
Recordset1_first = Recordset1_total
End If
If (Recordset1_last > Recordset1_total) Then
Recordset1_last = Recordset1_total
End If
If (Recordset1_numRows > Recordset1_total) Then
Recordset1_numRows = Recordset1_total
End If
End If
%>
<%
' *** Recordset Stats: if we don't know the record count, manually count them处理错误的RS
If (Recordset1_total = -1) Then
' count the total records by iterating through the recordset
Recordset1_total=0
While (Not Recordset1.EOF)
Recordset1_total = Recordset1_total + 1
Recordset1.MoveNext
Wend
' reset the cursor to the beginning
If (Recordset1.CursorType > 0) Then
Recordset1.MoveFirst
Else
Recordset1.Requery
End If
' set the number of rows displayed on this page
If (Recordset1_numRows < 0 Or Recordset1_numRows > Recordset1_total) Then
Recordset1_numRows = Recordset1_total
End If
' set the first and last displayed record
Recordset1_first = 1
Recordset1_last = Recordset1_first + Recordset1_numRows - 1
If (Recordset1_first > Recordset1_total) Then
Recordset1_first = Recordset1_total
End If
If (Recordset1_last > Recordset1_total) Then
Recordset1_last = Recordset1_total
End If
End If
%>
<%
Dim MM_paramName
%>
<%
' *** Move To Record and Go To Record: d
评论 (0) All
