当前位置: 首页 > 图文教程 > 网络编程 > ASP > 存贮过程

ASP
ASP基础讲座(下)
解决IIS5 HTTP500内部错误
ASP 3.0高级编程(四十六)
ASP 3.0高级编程(四十五)
ASP 3.0高级编程(四十四)
ASP 3.0高级编程(四十三)
ASP 3.0高级编程(四十二)
ASP 3.0高级编程(四十一)
ASP 3.0高级编程(三十九)
ASP 3.0高级编程(三十八)
ASP 3.0高级编程(三十七)
ASP 3.0高级编程(三十六)
ASP 3.0高级编程(三十五)
ASP 3.0高级编程(三十四)
ASP 3.0高级编程(三十三)
ASP 3.0高级编程(三十二)
ASP 3.0高级编程(三十一)
ASP错误代码说明
jscript错误代码及相应解释大全
ASP错误处理

ASP 中的 存贮过程


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-03   浏览: 138 ::
收藏到网摘: n/a

CREATE PROCEDURE login_verify

(
@community_id int, --拿值
@username varchar(20),
@password varchar(40),
@result tinyint output
)

AS

set nocount ON

declare @service_deadline_date smalldatetime,@community_setting_max_online_count int ---定义一个变量为 短日期格式

select @community_setting_max_online_count=community_setting_max_online_count,@service_deadline_date=service_deadline_date from community_info where community_id=@community_id --这里是求最大登录人数

if datediff(d,@service_deadline_date,getdate())>10 --其实这个是限制用户的使用期,求当前日期与库中的记录日期如时大于10天,则返回@result =11
begin
set @result=11 --超过使用期
return
end

if (select count(*) from online_user where =@community_setting_max_online_count">community_id=@community_id)>=@community_setting_max_online_count --根据库中的记录设定与当前人数比较
begin
set @result=10 --超出在线人数限制 --返回@result=10
return
end

declare @stamia int,@last_update_stamia_date smalldatetime,@level_id int --定义变量 整型 短日期型 整型
declare @userid int ,@user_role int
select @userid=userid,@user_role=user_role,@stamia=stamia,@last_update_stamia_date=last_update_stamia_date,@level_id=level_id from user_info where username=@username and password=@password and community_id=@community_id and user_type=0

--从用户信息表中,将一些信息写入到定义的三个变量中

if @userid is not null ----如果@userid 不变null值
begin --用户名和密码校验成功
set @result=1 --检验成功
return
end
else
begin
set @result=0 ---登录失败
end

set nocount OFF

GO

我们给上面的过程取个名login_verify叫做

写成是ASP代码中调用安全认证的地方

'''事先已经定义好conn

Set cmd.ActiveConnection=conn
cmd.CommandText="login_verify"
cmd.CommandType=&H0004

@community_id int, --拿值
@username varchar(20),
@password varchar(40),
@result int

cmd.Parameters.Append cmd.CreateParameter("@community_id",3)
cmd.Parameters.Append cmd.CreateParameter("@username ",200)
cmd.Parameters.Append cmd.CreateParameter("@password",200)

cmd("@community_id")=session("community_id")
cmd("@username")=request("userid")
cmd("@password")=request("userid")

cmd.execute

dim result

result=cmd("@result")

conn.close

if trim(result)="1" then

'''''''''''''登录成功的提示与操作
else

''''''''''''''''''''''登录失败的提示与操作
end if