当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > [分享]Sun X3151A 光纤网卡故障排除实例

Unix/Linux
Linux系统配置与优化经验谈
LINUX引导过程
Linux 和 Windows 共享交换区
Linux 内核解读入门
RPM 的使用
如何设置虚拟匿名FTP主机?
文件的存取权限—模式位疑难详解
Samba剖析与定制技巧
设置和修改 X Window 的显示模式
linux使用经验点滴
安装 Linux 无盘工作站
如何设置串口多用户卡
Linux下即插即用设备的安装
在Linux中限制用户空间
深 入Linux 的LILO
解读LILO错误提示信息
Linux中IP隧道的分析与建议
Lilo.conf (LILO 配置文件) 手册
对待LINUX的几点忠告
配置linux与win2000/XP/NT 双重引导

Unix/Linux 中的 [分享]Sun X3151A 光纤网卡故障排除实例


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 65 ::
收藏到网摘: n/a


OS:solaris 9 (12/03)
检查X3151A(Sun GigaSwift Ethernet MMF (Fiber))的patch:
#showrev -p |grep 112817-16 (已有)
连接光纤线到HUAWEI 6506上去网卡灯时亮时不亮,主机reboot后网卡灯熄灭,光纤线重新插一下灯亮,试验了几变都是一样的现象!
后在sunsolve上搜索到了这些信息:
[b:8ebf8dc188]The Link does not come up or has problems when connected to Cisco switch.[/b:8ebf8dc188]
* Often on Cisco switches (e.g. Catalyst 6500) autonegotiation was disabled. This is not in accordance with the IEEE 802.3ab standard. To get the connection running, enable autonegotiation on the switch. Setting both sides to forced 1000 Mbit/s Full Duplex for testing may also work, but is not recommended for permanent use.
后将HUAWEI 6506相应端口重新设置autonegotiation后,故障解决!
deeperpurple 回复于:2004-10-29 18:23:54 呵呵。。蜘蛛越来越多啊~~~
东方蜘蛛 回复于:2004-10-29 18:29:01 呵呵,见笑了!