当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > [分享]Sun X3151A 光纤网卡故障排除实例

Unix/Linux
查看linux 下已经安装的软件包信息
linux 系统中软件raid 配置方法
linux 下MySQL服务器的启动与停止
linux 系统下FTP服务器配置方法
Linux系统下如何挂载U盘,硬盘,光驱
linux 系统下DHCP服务器 配置方法
Linux系统下软件的安装与卸载
在Fedora 9中启用ext4文件系统的方法
linux下挂载(mount)光盘镜像文件、移动硬盘、U盘、Windows网络共享和NFS网络共享
Linux查看文件夹大小的命令
LINUX系统grub常见错误分析
llinux fdisk分区工具 使用方法
linux 系统telnet乱码
rhythmbox 乱码的解决方法
linux单网卡绑定多ip
tar.gz 和tar.bz2 详细解释
linux学习笔记
linux系统rpm安装包详解
linux 服务器常用维护命令
出现The file /boot/grub/stage1 not read cor 解决办法

Unix/Linux 中的 [分享]Sun X3151A 光纤网卡故障排除实例


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 138 ::
收藏到网摘: n/a


OS:solaris 9 (12/03)
检查X3151A(Sun GigaSwift Ethernet MMF (Fiber))的patch:
#showrev -p |grep 112817-16 (已有)
连接光纤线到HUAWEI 6506上去网卡灯时亮时不亮,主机reboot后网卡灯熄灭,光纤线重新插一下灯亮,试验了几变都是一样的现象!
后在sunsolve上搜索到了这些信息:
[b:8ebf8dc188]The Link does not come up or has problems when connected to Cisco switch.[/b:8ebf8dc188]
* Often on Cisco switches (e.g. Catalyst 6500) autonegotiation was disabled. This is not in accordance with the IEEE 802.3ab standard. To get the connection running, enable autonegotiation on the switch. Setting both sides to forced 1000 Mbit/s Full Duplex for testing may also work, but is not recommended for permanent use.
后将HUAWEI 6506相应端口重新设置autonegotiation后,故障解决!
deeperpurple 回复于:2004-10-29 18:23:54 呵呵。。蜘蛛越来越多啊~~~
东方蜘蛛 回复于:2004-10-29 18:29:01 呵呵,见笑了!