繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- 如何变更收取的邮件的默认存储位置
- 如何在虚拟主机中设定sendmail
- 为什么当系统启动到Sendmail时会暂停
- sendmail下如何限制邮件大小
- sendmail如何允许某个地址邮件转发
- 为什么不能配置邮件服务器为openrelay的
- 为什么访问Javaapplets的时候显示的却是纯文本
- 如何在日志里面记录apache浏览器和引用信息
- 为什么我的网站只能从局域网里面访问，Internet上无论哪里都访问不到
- 为什么apache配置文件里的Options属性没有得到预期的效果
- apache如何打开或者关闭列目录功能
- 如何屏蔽来自某个Internet地址的用户访问Apache服务器
- 如何使每个用户有独立的cgi-bin目录
- 先来一篇文章试试
- 在redhat中建立交换分区
- LINUX下的ssh认证,不用密码登陆另一台机器
- 基于 Linux 的实时系统
- 量身订作一个OS
- 使用软式磁碟
- 对应DOS和Linux中的相关指令
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 112 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
