繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- Linux下XFConfig的有效使用
- 在Linux下如何驱动D-linkDFE-530TX网卡
- Linux上的sysctl
- GRUB引导管理器下,如何恢复redhatlinux的root密码?
- 为最佳性能而调优RedHat(5)
- 为最佳性能而调优RedHat（2）
- Linux问与答（2）:KDE问题
- IBM有哪些开放集群系统,它们的区别是什么?
- zSeriesLinux可以运行在哪个版本的VM下？
- zSeries的Linux有什么主要元素构成？
- i系列上运行的Linux分区数量和Linux版本
- 简易的proxy程序的开发过程(2)
- Linux-PAM系统管理指南(1)
- 网管要用Linux
- LILO可以装在软盘上
- 如何在两台linux服务器之间用RSA键对的方法SSH/SCP不需密码
- linux路由器下如何限制某几个IP连接互联网，而同时防止IP盗用
- 如何使用UUCP
- Linux下的NFS
- IntelI810主板的X的安装
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 131 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
