繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- linux内核编译详解
- 在linux下面叫firefox 支持java (zt)
- 利用tar包安装和配置高可用性的vsftp(转)
- 如何安装.src.rpm软件包：
- uClinux操作系统移植,看看
- Big Endian and Little Endian
- 关于ARM处理器Remap的理解 (抄的)
- 基于S3C4510B的系统的Flash擦除与烧写问题（一）
- 基于S3C4510B的系统的Flash擦除与烧写问题（二）
- Linux指令篇:讯息传送与信件管理--mesg
- Linux指令篇:讯息传送与信件管理--mailq
- Linux指令篇:讯息传送与信件管理--mail
- Linux指令篇:讯息传送与信件管理--aliases
- Linux指令篇:使用者资讯与管理--chsh
- Linux指令篇:使用者资讯与管理--chfn
- Linux指令篇:起始管理--init
- Linux指令篇:起始管理--halt
- Linux指令篇:使用者管理--su
- Linux网管123---第4章.安装及硬体组态-6.硬体组态
- Linux指令篇:DOS相容指令--mcd
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 221 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
