繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- Ethernet HOWTO Linux以太网-HOWTO (8)杂项
- Jaz-drive HOWTO -- 1. 导言
- Jaz-drive HOWTO -- 2. Jaz 磁碟机的硬件
- Jaz-drive HOWTO -- 3. 电脑确认已安装 Jaz 磁碟机
- Config HOWTO 系统设置 (2)
- Ethernet HOWTO Linux以太网-HOWTO (1)导言
- Ethernet HOWTO Linux以太网-HOWTO (2)常见问题
- Linux技巧:bz2文件如何解压缩
- Linux各种发行版简易说明
- X-window下如何设定Linux的控制台休眠
- Redhat 7.x 中xinetd完全指南
- 什么是 Linux？
- Linux下网卡设置常见问题
- 设置和修改X-Window的显示模式
- 如何实现Linux的软件磁盘阵列(RAID)
- 关于Linux下网卡的一些技术信息
- linux下如何刻盘
- linux显卡的配置
- 如何才能让Linux运行两块以太网卡？
- 如何用鼠标拷贝与粘贴？
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 217 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
