繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.
- Unix/Linux
- Linux命令Man解释:groupadd :建立新组
- Linux命令Man解释:PPPD(8) :点对点daemon协议
- 如何修改登录画面？
- linux磁盘管理命令--dd
- linux磁盘管理命令--fdformat
- Linux 指令篇:DOS相容指令--mdeltree
- Linux 指令篇:DOS相容指令--mlabel
- Linux下如何删除Windows分区
- Linux 指令篇:磁片工具--mformat
- Linux 指令篇:磁片工具--mkdosfs
- Linux 指令篇:设备管理--MAKEDEV
- Linux 指令篇:设备管理--dumpkeys
- Linux 指令篇:设备管理--loadkeys
- Linux 指令篇:设备管理--rdev
- Linux 指令篇:设备管理--setleds
- Linux 指令篇:文件系统--dd
- Linux 指令篇:文件系统--df
- Ethernet HOWTO Linux以太网-HOWTO (3)性能小技巧
- CVS RCS HOWTO 原始程式码版本控制系统 (3)
- Config HOWTO 系统设置 (1)
Unix/Linux 中的 Reinstall the boot manager.
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 204 ::
收藏到网摘: n/a
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.
评论 (0) All
