当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Reinstall the boot manager.

Unix/Linux
Linux关机命令详解
如何在Linux中访问硬盘DOS分区、软盘和光盘
在 RedHat 环境如何手工建立tunnel(IPV6)?
Linux下新手装网卡指南
为Linux操作系统安装第2个硬盘
在Linux操作系统中使用手写板
Linux内核初始化过程简要介绍
Linux磁盘存储区管理原理与技巧
Linux操作系统中备份恢复技术的应用
浅谈linux操作系统的优化及安全配置
Linux操作系统定时任务系统Cron入门
主流嵌入式Linux动态扩展技术比较分析
让关闭的Linux操作系统实现防火墙功能
运用更方便 Linux操作系统三则应用技巧
一个Linux爱好者的2.6.11内核编译过程
用Linux的dd命令简单破解加密软盘
如何共享两台Linux操作系统的根目录
Linux操作操作两种常见启动故障解决方法
Linux内核源代码的阅读及相关工具介绍
Linux 关机重启流程分析

Unix/Linux 中的 Reinstall the boot manager.


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 116 ::
收藏到网摘: n/a

Windows killed my boot manager! How do I get it back?
3.9. Windows killed my boot manager! How do I get it back?You can reinstall the boot manager FreeBSD comes with in one of three ways:Running DOS, go into the tools/ directory of your FreeBSD distribution and look for bootinst.exe. You run it like so:...\TOOLS> bootinst.exe boot.binand the boot manager will be reinstalled.Boot the FreeBSD boot floppy again and go to the Custom installation menu item. Choose Partition. Select the drive which used to contain your boot manager (likely the first one) and when you come to the partition editor for it, as the very first thing (e.g. do not make any changes) select (W)rite. This will ask for confirmation, say yes, and when you get the Boot Manager selection prompt, be sure to select ``Boot Manager''. This will re-write the boot manager to disk. Now quit out of the installation menu and reboot off the hard disk as normal.Boot the FreeBSD boot floppy (or CDROM) and choose the ``Fixit'' menu item. Select either the Fixit floppy or CDROM #2 (the ``live'' filesystem option) as appropriate and enter the fixit shell. Then execute the following command:Fixit# fdisk -B -b /boot/boot0 bootdevicesubstituting bootdevice for your real boot device such as ad0 (first IDE disk), ad4 (first IDE disk on auxiliary controller), da0 (first SCSI disk), etc.