当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > FB5.4+gnome2.10.0

Unix/Linux
查看linux 下已经安装的软件包信息
linux 系统中软件raid 配置方法
linux 下MySQL服务器的启动与停止
linux 系统下FTP服务器配置方法
Linux系统下如何挂载U盘,硬盘,光驱
linux 系统下DHCP服务器 配置方法
Linux系统下软件的安装与卸载
在Fedora 9中启用ext4文件系统的方法
linux下挂载(mount)光盘镜像文件、移动硬盘、U盘、Windows网络共享和NFS网络共享
Linux查看文件夹大小的命令
LINUX系统grub常见错误分析
llinux fdisk分区工具 使用方法
linux 系统telnet乱码
rhythmbox 乱码的解决方法
linux单网卡绑定多ip
tar.gz 和tar.bz2 详细解释
linux学习笔记
linux系统rpm安装包详解
linux 服务器常用维护命令
出现The file /boot/grub/stage1 not read cor 解决办法

Unix/Linux 中的 FB5.4+gnome2.10.0


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 114 ::
收藏到网摘: n/a


zzz
http://bbs.chinaunix.net/forum/viewtopic.php?t=560657&show_type=&postdays=0&postorder=asc&start=0
FreeBSD5.4Release X Windows 安装笔记 (Freebsd5.4R+Gnome2.10.0) By 老管 2005-6-7 email: funpower [at] gmail.com 截图: 机器配置: 核心:P4.7G 主板:MSI845 内存:金士顿256*2 硬盘:迈拓40G 显卡:ATI Radeon 7500 显板:Samsung SyncMaster 753DFX 声卡:Creative Sound Blaster Live! 一、安装FreeBSD5.4Release 从http://www.freebsd.org/releases/5.4R/announce.html选择一个FTP服务器下载,然后刻成光盘。接下来从光盘安装,我的几点选项: 1、选择软件包时选择最小化安装。 2、安装到ports时选择net-->cvsup,以便更新ports。 其它的都默认安装,具体可参考:http://www.freebsd.org.cn/snap/doc/zh_CN.GB2312/books/handbook/install-start.html,安装完后重启机器。 二、配置FreeBSD 1、配置/etc/rc.conf,我的rc.conf: 代码:hostname="gjf.jscpu.com" defaultrouter="192.168.20.254" ifconfig_rl0="inet 192.168.121.250 netmask 255.255.255.0" ifconfig_rl1="inet 192.168.20.1 netmask 255.255.255.0" inetd_enable="YES" linux_enable="YES" moused_enable="YES" #sshd_enable="YES" #usbd_enable="YES"2、配置/etc/resolv.conf,我的resolv.conf: 代码:domain jscpu.com nameserver 221.228.255.1 nameserver 218.2.135.1完成后重启机器。 3、将光盘放入光驱中,安装ports和src 代码:#/stand/sysinstall然后选择Configure-->Distributions,然后利用空格键选择src和ports两项,点install,安装完成后重启机器。 4、启用ftp(后面上传文件用) 代码:#cd /etc # ee inetd.conf将ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l一行的#号去掉。 保存后退出。 三、升级ports 代码:#cp /usr/share/examples/cvsup/ports-supfile /etc/funpower #cd /etc # ee funpower修改下面一行: default host=cvsup2.FreeBSDChina.org 然后运行如下命令: 代码:#cvsup -g -L 2 funpower完成安装后重启机器。 四、配置内核文件 配置内核时每项说明可以参考这:http://people.freebsdchina.org/kinki/9.htm,配置中要加入对声卡的支持,关于如何安装声卡可以参考这:http://www.freebsd.org.cn/snap/doc/zh_CN.GB2312/books/handbook/sound-setup.html 下面是具体的操作: 代码:#cd /sys/i386/conf #cp GENERIC funpower #ee funpower我的内核文件如下: 代码:# # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for th