繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Problems with ClusterKnoppix 3.6
- Unix/Linux
- Linux管理员手册(4)--内存管理
- 开始进入Linux的知识问答
- TCP/IP基础----为Linux做准备(1)
- 怎样用linux拨号上网
- Linux 下文件的压缩、打包与解开
- Linux操作系统下的浏览器举要
- Linux中的字型(FONTS)设定
- 用FIPS为LINUX分区
- Squid -- Linux下的一个优秀代理服务器软件使用详解
- 基于Linux的目录服务实现
- 动手制做自己的Linux启动盘（1）
- 如何为Linux添加软件详解
- LINUX的引导过程
- 关于Linux下编写和编译程序的几个问题
- 中文BluePoint Linux 1.0RC 版安装介绍(二)
- 怎样让你的Linux使用起来更像Windows
- Linux下无线上网设置方法
- Linux系统下架设CS服务器的完美方法
- 优化Linux系统硬盘的七个实用技巧
- 在Linux操作系统中如何截获系统调用
Unix/Linux 中的 Problems with ClusterKnoppix 3.6
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 53 ::
收藏到网摘: n/a
http://bofh.be/clusterknoppix/forum/lnf/print.php3?art=news/20050101-091632-Bugs.xml
......
I'm having the same issue, except that I am using network booting for the clients.
My master has 2 ethernet cards, one for the internal network and one for the external. Traditionally, you set the default gateway for the system according to the needs of the external card. If I do this, the clients boot fine, and appear to associate with each other. However, when I run
tyd -f init
on the master, it complains that the gateway is not available from this adapter. Of course it isn't available; it's on a different network!
Conversely, if I set the master's default gateway to itself, tyd works with the same issues you found, but none of the client nodes can find the master on tftp.... so none of the clients can boot.
Agh! I agree that the problem is likely gateway related; but there MUST be some way to run clusterknoppix on a system with two network cards!
......
必须有gateway,而且一定要有two network cards !
评论 (0) All
