繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > 如何克隆HP-UX系统盘
- Unix/Linux
- FreeBSD5.4之apache－2.0.54＋php＋ZendOptimizer简单安装、设置
- 成功备份UNIX系统
- 在unix/bsd上让apache支持asp
- OpenBSD3.6编译内核的方法
- SSH到FreeBSD支持中文显示和输入
- 从硬盘安装freebsd
- Openbsd 3.8上安装配置 APACHE + MYSQL + PHP + mod_limitipco
- Squid基础与配置
- Freebsd 6.0安装配置Apache+MySQL+PHP+Myphpadmin+Webmin
- OpenBSD 3.8 release 架设FTP服务器
- freeBSD5.4下安装配置apache2+php5+mysql5过程
- freebsd vsftpd 配置方法
- freebsd下jail命令说明
- FreeBSD 6.2架设网站服务器教程图解
- NetBSD 4.0 正式版官方下载地址
- FreeBSD 7.0 正式版官方下载地址
- FreeBsd 更新ports 的简单方法
- 用Quota来配置OpenBSD下磁盘限额
- FreeBsd6.2下ports安装配置vsftpd
- inter 千M网卡驱动安装和启用vlan.Polling抗拒绝服务
Unix/Linux 中的 如何克隆HP-UX系统盘
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 240 ::
收藏到网摘: n/a
可以分两个阶段来做;
第一阶段
1 pvcreate -B /dev/rdsk/cxtydz
2 mkboot /dev/rdsk/cxtydz
3 mkboot -a "hpux -lq(；0）/stand/vmunix" /dev/rdsk/cxtydz
第二阶段
1 dd if=/dev/dsk/c1t2d0 of=/dev/dsk/cxtydz
bs=1024k
供参考：
If you do not have Mirror/UX you can manually duplicate your boot disk to another disk. This is the process.
* Assuming current LVM boot disk is on c1t2d0 and you want to duplicate to c2t2d0.
# pvcreate -B /dev/rdsk/c2t2d0
# mkdir /dev/vgroot; mknod /dev/vgroot/group c 64 0x010000
# vgcreate /dev/vgroot /dev/dsk/c2t2d0
# mkboot /dev/rdsk/c2t2d0
# mkboot -a "hpux (;0)/stand/vmunix" /dev/rdsk/c2t2d0
# lifls /dev/rdsk/c2t2d0
==> do lifcp of all other boot utilities from c1t2d0 to c2t2d0.
# lvcreate -C y -r n -n lvol1 /dev/vgroot
# lvextend -L 84 /dev/vgroot/lvol1 /dev/dsk/c2t2d0
==> creating and extending boot lv (/stand)
# lvcreate -C y -r n -L 2048 -n lvol2 /dev/vgroot
==> creating swap LV
# lvcreate -C y -r n -n lvol3 /dev/vgroot
# lvextend -L 6544 /dev/vgroot/lvol3 /dev/dsk/c2t2d0
==> creating and extending root lv (/)
# lvlnboot -b lvol1 /dev/vgroot
# lvlnboot -r lvol3 /dev/vgroot
# lvlnboot -s lvol2 /dev/vgroot
# lvlnboot -d lvol2 /dev/vgroot
==> update BDRA for boot, root, swap and dump LVs.
# newfs -F hfs /dev/vgroot/rlvol1 ==> /stand must be hfs
# newfs -F vxfs /dev/vgroot/rlvol3
# mkdir /newstand
# mount /dev/vgroot/lvol1 /newstand
# cd /stand
# find . -xdev -depth -print|cpio pxdm /newstand
# umount /newstand
# mkdir /newroot
# mount /dev/vgroot/lvol3 /newroot
# cd /
# find . -xdev -depth -print|cpio -pxdm /newroot
# cd /newroot/etc
# vi fstab
==> edit appropriately
# lvlnboot -R
==> resync vg headers
# setboot -p 0/0/2/0.2.0
==> change prim boot path to new disk (c2t2d0)
The above assume you have /, /stand and swap only. If you have separate /opt, /usr, /tmp mounted for example, perform appropriate lvcreate on those. When it's all done you should be able to boot up from your 2nd disk. From here onwards, you have to manually synchronize bot your boot disks.
评论 (0) All
