繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > RHEL AS3U3 "vsftpd dead but subsys locked" problem
- Unix/Linux
- linux内核编译详解
- 在linux下面叫firefox 支持java (zt)
- 利用tar包安装和配置高可用性的vsftp(转)
- 如何安装.src.rpm软件包：
- uClinux操作系统移植,看看
- Big Endian and Little Endian
- 关于ARM处理器Remap的理解 (抄的)
- 基于S3C4510B的系统的Flash擦除与烧写问题（一）
- 基于S3C4510B的系统的Flash擦除与烧写问题（二）
- Linux指令篇:讯息传送与信件管理--mesg
- Linux指令篇:讯息传送与信件管理--mailq
- Linux指令篇:讯息传送与信件管理--mail
- Linux指令篇:讯息传送与信件管理--aliases
- Linux指令篇:使用者资讯与管理--chsh
- Linux指令篇:使用者资讯与管理--chfn
- Linux指令篇:起始管理--init
- Linux指令篇:起始管理--halt
- Linux指令篇:使用者管理--su
- Linux网管123---第4章.安装及硬体组态-6.硬体组态
- Linux指令篇:DOS相容指令--mcd
Unix/Linux 中的 RHEL AS3U3 "vsftpd dead but subsys locked" problem
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 155 ::
收藏到网摘: n/a
In RHEL AS3Update3, after started the vsftp ftp server and connected to it from another computer, it prompted the user neaded an authorization and stopped there. Then when you use the server configure tools to restart the vsftp service , it says "vsftpd dead but subsys locked".
In RHEL AS3Update3, after started the vsftp ftp server and connected to it from another computer, it prompted the user neaded an authorization and stopped there. Then when you use the server configure tools to restart the vsftp service , it says "vsftpd dead but subsys locked". I used the followed method to figure it out.
Method 1). Open the /etc/xinit.d/gssftp file. change the line "Server_args= -l -a " to "Server_args=-l "
this will resolve the authorization problem and can connect the ftp server successfully. but the password verify process is time consumer.
Method 2). Open the /etc/xinit.d/gssftp file, change the line "disable=no" to "disable=yes"
this will make the vsftp server working as a stand alone demon and the connection is fluent.
After this operation, you must use service vsftpd restart to restart the vsftp server.
评论 (0) All
