繁體中文当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > RHEL AS3U3 "vsftpd dead but subsys locked" problem
- Unix/Linux
- Linux 指令篇：系统设置--setup
- Linux 指令篇：系统设置--sndconfig
- Linux 指令篇：系统设置--SVGAText Mode
- Linux 指令篇：系统设置--timeconfig
- Linux 指令篇：系统设置--ulimit
- Linux 指令篇：系统设置--unalias
- Linux 指令篇：系统设置--unset
- 为 Linux 安装触摸屏
- 无线网卡在Linux下活起来
- Linux下安装摄像头驱动程序的三种方法
- Linux系统下设备驱动的安全端口分配
- 用于 Linux 的开放 BIOS开源项目介绍
- 为系统处理器编写Linux设备驱动程序
- Linux设备驱动框架、配置文件及加载
- 深入浅出Linux设备驱动编程之内核模块
- 详解Linux操作系统设备驱动兼容性
- Linux设备驱动编程之阻塞与非阻塞
- 深入浅出Linux设备驱动之并发控制
- Linux 的魅力: TiVo 揭密
- Linux 助力 Nokia 770
Unix/Linux 中的 RHEL AS3U3 "vsftpd dead but subsys locked" problem
出处:互联网 整理: 软晨网（RuanChen.com） 发布: 2009-11-01 浏览: 194 ::
收藏到网摘: n/a
In RHEL AS3Update3, after started the vsftp ftp server and connected to it from another computer, it prompted the user neaded an authorization and stopped there. Then when you use the server configure tools to restart the vsftp service , it says "vsftpd dead but subsys locked".
In RHEL AS3Update3, after started the vsftp ftp server and connected to it from another computer, it prompted the user neaded an authorization and stopped there. Then when you use the server configure tools to restart the vsftp service , it says "vsftpd dead but subsys locked". I used the followed method to figure it out.
Method 1). Open the /etc/xinit.d/gssftp file. change the line "Server_args= -l -a " to "Server_args=-l "
this will resolve the authorization problem and can connect the ftp server successfully. but the password verify process is time consumer.
Method 2). Open the /etc/xinit.d/gssftp file, change the line "disable=no" to "disable=yes"
this will make the vsftp server working as a stand alone demon and the connection is fluent.
After this operation, you must use service vsftpd restart to restart the vsftp server.
评论 (0) All
