当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Linux X-Window配置指南

Unix/Linux
简析Linux中如何改变文件或目录的访问权限
初次安装Linux系统手记
Linux上搭建C/C++IDE开发环境
独辟蹊径:实现Linux下的局域网远程接入
不同发行版Linux操作系统如何实现共存
将Linux代码移植到Windows的简单方法
Linux系统中如何实现远程控制
linux系统如何访问NTFS磁盘
简单高效:用Swatch做Linux日志分析
全球顶尖超级计算机60%用Linux系统
Linux操作系统12则经典应用技巧
RedHat Linux操作系统配置技巧
Linux的防火墙配置—基础篇
浅谈Linux文件系统反删除方法
浅谈Linux优化及安全配置
解读Linux文件权限的设置方法
保护Linux下的Apache网站
如何在Linux下压缩文件
Linux爱好者入门教程
RedHat源码升级-(OpenSSL + OpenSSH)

Unix/Linux 中的 Linux X-Window配置指南


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 93 ::
收藏到网摘: n/a

  X-Window是一种风行于UNIX的图形界面,现在它已经成功地移植到了Linux平台上,装上X-Window这一漂亮的门面,一定能让Linux蓬荜生辉。它的最大特点是设备无关性,安装完Linux后只要用xf86config配置一下就可以立马上班了。 
首先当然得准备好资料,我将显示器和显卡的说明书放在案边,因为在设定X-Window时要知道显示器的垂直及水平扫描频率、显卡的主芯片、显存大小、DAC芯片和时钟芯片型号。 
  运行xf86cofnig后,前面几个画面没什么重要的, 一直按Enter直到设定鼠标的地方!屏幕上出现: 
First specify a mouse protocol type. Choose one from the following list: 
1. Microsoft compatible (2-button protocol) 
2. Mouse Systems (3-button protocol) 
3. Bus Mouse 
4. PS/2 Mouse 
5. Logitech Mouse (serial, old type, Logitech protocol) 
6. Logitech MouseMan (Microsoft compatible) 
7. MM Series 
8. MM HitTablet 
  相信大家都知道自己的爱鼠该选那一种吧?如果你的鼠标是可以2键与3键切换的,建议你使用3键的,因为X-Window下会使用到第三个键。另外罗技的鼠标一般都应该要选第六项。我的小老鼠嘛,最常见,选2。 
接下来会问好些问题,在询问是否须要启动3键鼠标仿真功能时,最好选“Y”,其他的根据我的经验一路回车就能搞定。直到屏幕上出现: 
Please answer the following question with either 'y' or 'n'. 
Do you want to enable these bindings for the Alt keys? 
  要我们设置键盘的Alt键,直接按Enter或输入“Y”都行。 
  接着屏幕显示: 
It is VERY IMPORTANT that you do not specify a monitor type with a horizontal sync range that is beyond the capabilities of your monitor. 
If in doubt,choose a conservative setting. 
hsync in kHz; monitor type with characteristic modes 
1 31.5; Standard VGA, 640x480 @ 60 Hz 
2 31.5 - 35.1; Super VGA, 800x600 @ 56 Hz 
3 31.5, 35.5; 8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600) 
4 31.5, 35.15, 35.5; Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz 
5 31.5 - 37.9; Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz 
6 31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz 
7 31.5 - 57.0; High Frequency SVGA, 1024x768 @ 70 Hz 
8 31.5 - 64.3; Monitor that can do 1280x1024 @ 60 Hz 
9 31.5 - 79.0; Monitor that can do 1280x1024 @ 74 Hz 
10 Enter your own horizontal sync range 

Enter your choice (1-10): 
  让你选择显示器的水平扫描频率,如果你有显示器说明书,按说明书选择,或选10自己输入。如果没有说明书,选5比较合适。接下来就是设定垂直扫描频率了: 
You must indicate the vertical sync range of your monitor. You can either select one of the predefined ranges below that correspond to industry-standard monitor types, or give a specific range. For interlaced modes,the number that counts is the high one (e.g. 8