当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Linux X-Window配置指南

Unix/Linux
Linux命令Man解释:useradd:帐号建立或更新
Linux 网管 123 --- 第7章. 自订的组态及管理内容 -7.使用 Linuxc
Linux 网管 123 --- 第8章. 备份及回存程序 -1.伺服器备份程序
Linux 网管 123 --- 第8章. 备份及回存程序 -2.伺服器回存程序(tar.
Linux 网管 123 --- 第8章. 备份及回存程序 -3.Cisco 路由器组态备
Linux 网管 123 --- 第9章. 各种杂项管理工作 -1.检查储存空间
Linux 网管 123 --- 第9章. 各种杂项管理工作 -2.管理进程
Linux 网管 123 --- 第9章. 各种杂项管理工作 -3.进程的启动及停止
Linux 网管 123 --- 第9章. 各种杂项管理工作 -4.使用 Cron 及 C
Linux 网管 123 --- 第10章. 升级 Linux 及其他应用软体 -1.使用
Linux 网管 123 --- 1. 前言 2. 简介
Linux 网管 123 --- 第3章. 概观 Linux
Linux 网管 123 --- 第4章. 安装及硬体组态 - 1.建立一张安装磁片
轻轻松松的安装Slackware Linux -- 4.如何在硬碟建置Linux系统
轻轻松松的安装Slackware Linux -- 5.其他非标准安装程序解析
如何重新设定时区
Linux中有没有支援 Solairs x86 的档案系统?有的话要如何mount?
MBR如果被覆盖了怎麽办?
如何使用命令trap来捕捉信号?
如何进行增量备份?

Unix/Linux 中的 Linux X-Window配置指南


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 59 ::
收藏到网摘: n/a

  X-Window是一种风行于UNIX的图形界面,现在它已经成功地移植到了Linux平台上,装上X-Window这一漂亮的门面,一定能让Linux蓬荜生辉。它的最大特点是设备无关性,安装完Linux后只要用xf86config配置一下就可以立马上班了。 
首先当然得准备好资料,我将显示器和显卡的说明书放在案边,因为在设定X-Window时要知道显示器的垂直及水平扫描频率、显卡的主芯片、显存大小、DAC芯片和时钟芯片型号。 
  运行xf86cofnig后,前面几个画面没什么重要的, 一直按Enter直到设定鼠标的地方!屏幕上出现: 
First specify a mouse protocol type. Choose one from the following list: 
1. Microsoft compatible (2-button protocol) 
2. Mouse Systems (3-button protocol) 
3. Bus Mouse 
4. PS/2 Mouse 
5. Logitech Mouse (serial, old type, Logitech protocol) 
6. Logitech MouseMan (Microsoft compatible) 
7. MM Series 
8. MM HitTablet 
  相信大家都知道自己的爱鼠该选那一种吧?如果你的鼠标是可以2键与3键切换的,建议你使用3键的,因为X-Window下会使用到第三个键。另外罗技的鼠标一般都应该要选第六项。我的小老鼠嘛,最常见,选2。 
接下来会问好些问题,在询问是否须要启动3键鼠标仿真功能时,最好选“Y”,其他的根据我的经验一路回车就能搞定。直到屏幕上出现: 
Please answer the following question with either 'y' or 'n'. 
Do you want to enable these bindings for the Alt keys? 
  要我们设置键盘的Alt键,直接按Enter或输入“Y”都行。 
  接着屏幕显示: 
It is VERY IMPORTANT that you do not specify a monitor type with a horizontal sync range that is beyond the capabilities of your monitor. 
If in doubt,choose a conservative setting. 
hsync in kHz; monitor type with characteristic modes 
1 31.5; Standard VGA, 640x480 @ 60 Hz 
2 31.5 - 35.1; Super VGA, 800x600 @ 56 Hz 
3 31.5, 35.5; 8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600) 
4 31.5, 35.15, 35.5; Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz 
5 31.5 - 37.9; Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz 
6 31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz 
7 31.5 - 57.0; High Frequency SVGA, 1024x768 @ 70 Hz 
8 31.5 - 64.3; Monitor that can do 1280x1024 @ 60 Hz 
9 31.5 - 79.0; Monitor that can do 1280x1024 @ 74 Hz 
10 Enter your own horizontal sync range 

Enter your choice (1-10): 
  让你选择显示器的水平扫描频率,如果你有显示器说明书,按说明书选择,或选10自己输入。如果没有说明书,选5比较合适。接下来就是设定垂直扫描频率了: 
You must indicate the vertical sync range of your monitor. You can either select one of the predefined ranges below that correspond to industry-standard monitor types, or give a specific range. For interlaced modes,the number that counts is the high one (e.g. 8