当前位置: 首页 > 图文教程 > 操作系统 > Unix/Linux > Linux X-Window配置指南

Unix/Linux
查看linux 下已经安装的软件包信息
linux 系统中软件raid 配置方法
linux 下MySQL服务器的启动与停止
linux 系统下FTP服务器配置方法
Linux系统下如何挂载U盘,硬盘,光驱
linux 系统下DHCP服务器 配置方法
Linux系统下软件的安装与卸载
在Fedora 9中启用ext4文件系统的方法
linux下挂载(mount)光盘镜像文件、移动硬盘、U盘、Windows网络共享和NFS网络共享
Linux查看文件夹大小的命令
LINUX系统grub常见错误分析
llinux fdisk分区工具 使用方法
linux 系统telnet乱码
rhythmbox 乱码的解决方法
linux单网卡绑定多ip
tar.gz 和tar.bz2 详细解释
linux学习笔记
linux系统rpm安装包详解
linux 服务器常用维护命令
出现The file /boot/grub/stage1 not read cor 解决办法

Unix/Linux 中的 Linux X-Window配置指南


出处:互联网   整理: 软晨网(RuanChen.com)   发布: 2009-11-01   浏览: 135 ::
收藏到网摘: n/a

  X-Window是一种风行于UNIX的图形界面,现在它已经成功地移植到了Linux平台上,装上X-Window这一漂亮的门面,一定能让Linux蓬荜生辉。它的最大特点是设备无关性,安装完Linux后只要用xf86config配置一下就可以立马上班了。 
首先当然得准备好资料,我将显示器和显卡的说明书放在案边,因为在设定X-Window时要知道显示器的垂直及水平扫描频率、显卡的主芯片、显存大小、DAC芯片和时钟芯片型号。 
  运行xf86cofnig后,前面几个画面没什么重要的, 一直按Enter直到设定鼠标的地方!屏幕上出现: 
First specify a mouse protocol type. Choose one from the following list: 
1. Microsoft compatible (2-button protocol) 
2. Mouse Systems (3-button protocol) 
3. Bus Mouse 
4. PS/2 Mouse 
5. Logitech Mouse (serial, old type, Logitech protocol) 
6. Logitech MouseMan (Microsoft compatible) 
7. MM Series 
8. MM HitTablet 
  相信大家都知道自己的爱鼠该选那一种吧?如果你的鼠标是可以2键与3键切换的,建议你使用3键的,因为X-Window下会使用到第三个键。另外罗技的鼠标一般都应该要选第六项。我的小老鼠嘛,最常见,选2。 
接下来会问好些问题,在询问是否须要启动3键鼠标仿真功能时,最好选“Y”,其他的根据我的经验一路回车就能搞定。直到屏幕上出现: 
Please answer the following question with either 'y' or 'n'. 
Do you want to enable these bindings for the Alt keys? 
  要我们设置键盘的Alt键,直接按Enter或输入“Y”都行。 
  接着屏幕显示: 
It is VERY IMPORTANT that you do not specify a monitor type with a horizontal sync range that is beyond the capabilities of your monitor. 
If in doubt,choose a conservative setting. 
hsync in kHz; monitor type with characteristic modes 
1 31.5; Standard VGA, 640x480 @ 60 Hz 
2 31.5 - 35.1; Super VGA, 800x600 @ 56 Hz 
3 31.5, 35.5; 8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600) 
4 31.5, 35.15, 35.5; Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz 
5 31.5 - 37.9; Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz 
6 31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz 
7 31.5 - 57.0; High Frequency SVGA, 1024x768 @ 70 Hz 
8 31.5 - 64.3; Monitor that can do 1280x1024 @ 60 Hz 
9 31.5 - 79.0; Monitor that can do 1280x1024 @ 74 Hz 
10 Enter your own horizontal sync range 

Enter your choice (1-10): 
  让你选择显示器的水平扫描频率,如果你有显示器说明书,按说明书选择,或选10自己输入。如果没有说明书,选5比较合适。接下来就是设定垂直扫描频率了: 
You must indicate the vertical sync range of your monitor. You can either select one of the predefined ranges below that correspond to industry-standard monitor types, or give a specific range. For interlaced modes,the number that counts is the high one (e.g. 8