//***********************************************************************
//函数名称：of_zy_yzfy for n_medicare_minihis
//功能说明：医嘱录入后执行时提交医嘱
//函数参数：
// 1.S_yb_zy_yzfy astr_jyxx 医嘱费用信息
//函数返回： (BOOLEAN)
//作者：annicybc 时间：2006/03/22
//***********************************************************************
//==============================================================================
// 交易函数说明:
//------------------------------------------------------------------------------
// 入口参数（Data）
// 空~空~空~空 + 本次提交医嘱的住院号+ 该住院号的医嘱费用列表ZYMX（用%%分隔）
//医嘱费用列表ZYMX
//（[]表示可以重复，重复的两条纪录之间也以%%分隔）=
//本次提交明细条数%%[明细序号(N20)+就诊类型（11门诊，21住院，char(2)）+
//退药标志（1退药，0正常，char(1)）+类别标志（1药品，2诊疗，char(1)）+
//项目中心端编号（Varchar(20)）+项目医院端编码（Varchar(20)）+项目医院端名称（varchar(40)）+
//项目医院端规格（varchar(30)）+项目医院端单位（varchar(8)）+医嘱日期（DATETIME）+
//医生姓名（varchar(20)）+项目单价（N(12,4)）+项目数量（N(12,4)，退药时为负数）+项目贴数（填1）+
//项目金额（N(10,4)）+自负比例（N(5,4)）+单复方标志(C1)]
//------------------------------------------------------------------------------
// 出口参数（Message）
// 交易结果~错误信息+空~空~空 + 无法保存的住院号列表 + 无法保存的费用流水号列表（列表间%%分隔）
//==============================================================================
String lpData[3]
String lpMessage = Space(3000),ls_data2=space(3000)
String ls_CheckData[],ls_CheckData2[]
Integer li_Rtn,i=1,j=1,k=1,h=1,li_detailsum
string ls_zyhm='',ls_wfbc_zyhlb='',ls_wfbc_yzlslb='',ls_wfbc_fylslb='',ls_yzfylb=''
string Prescription = '',Prescription2 = '',Prescription3 = ''
string Ls_lsxh,ls_jzlx,ls_tybz,ls_lbbz,ls_xmzxbh,ls_xmyybm,ls_xmyymc,ls_xmyygg,ls_xmyydw,ls_yzrq,ls_ysxm,Ls_xmdj,Ls_xmsl,Ls_xmts,Ls_xmje,Ls_zfbl,ls_dffbz

for i = 1 to Upperbound(astr_jyxx.inzyhm)
ls_zyhm = trim(string(astr_jyxx.inzyhm[i]))
if of_get_tradeid(33) = -1 then
is_error = "申请交易号失败!"
return false
end if
//取到该住院号对应的医嘱执行后产生的明细数据
//药品
select count(*) into :li_detailsum from zy_sfmx where zyhm = :ls_zyhm and ybtj = '0' using sqlhis;
DECLARE SFMX CURSOR FOR
select LSXH from zy_sfmx where zyhm = :ls_zyhm and ybtj = '0' using sqlhis;
OPEN SFMX;
J = 1
DO WHILE J <= li_detailsum
FETCH SFMX INTO :LS_LSXH;
// Ln_lsxh,ls_jzlx,ls_tybz,ls_lbbz,ls_xmzxbh,ls_xmyybm,"ls_xmyymc","ls_xmyygg",
//"ls_xmyydw",ldt_yzrq,ls_ysxm,ln_xmdj,ln_xmsl,ln_xmts,ln_xmje,ln_zfbl,ls_dffbz
select to_char(a.lsxh),to_char(21),to_char(0),to_char(a.xmlx),to_char(a.YBXH),to_char(a.xmxh),
to_char(a.fyrq,'yyyy.mm.dd'),to_char(c.ysxm),to_char(a.fydj,'99999990.0000'),to_char(a.fysl,'99999990.0000'),to_char(1),to_char(a.fydj*a.fysl,'999990.0000'),to_char(a.zfbl,'0.0000'),to_char(b.dffbz)
INTO :Ls_lsxh,:Ls_jzlx,:Ls_tybz,:Ls_lbbz,:Ls_xmzxbh,:Ls_xmyybm,
:Ls_yzrq,:Ls_ysxm,:Ls_xmdj,:Ls_xmsl,:Ls_xmts,:Ls_xmje,:Ls_zfbl
from zy_sfmx a,gy_ypml b,gy_ysml c
where a.zyhm = :ls_zyhm and a.ybtj = '0' and a.xmlx = 1 and a.xmxh = b.ypxh and a.kzys = c.ysdm
order by lsxh
using sqlhis;
if Ls_lbbz='1' then//药品
select nvl(ypmc,'无'),nvl(ypgg,'无'),to_char(dffbz,'0'),to_char(zydw)
into :ls_xmyymc,:ls_xmyygg,:ls_dffbz,:ls_xmyydw
from gy_ypml
where ybbh=:Ls_xmzxbh and ypxh = :Ls_xmyybm
using sqlhis;
elseif Ls_lbbz='2' then//费用
select nvl(fymc,'无')
into :ls_xmyymc
from gy_fyml
where ybbh=:Ls_xmzxbh and fyxh = :Ls_xmyybm using sqlhis;
ls_xmyygg='无'
ls_dffbz='0'
ls_xmyydw='无'
end if
CHOOSE CASE int(j/10)+1
CASE 1
Prescription = Prescription + trim(Ls_lsxh)+"%%"+trim(Ls_jzlx)+"%%"+trim(Ls_tybz)+"%%"+trim(Ls_lbbz)+"%%"+&
trim(Ls_xmzxbh)+"%%"+trim(Ls_xmyybm)+"%%"+trim(Ls_xmyymc)+"%%"+trim(Ls_xmyygg)+"%%"+trim(Ls_xmyydw)+&
"%%"+trim(Ls_yzrq)+"%%"+trim(Ls_ysxm)+"%%"+trim(Ls_xmdj)+"%%"+trim(Ls_xmsl)+"%%"+trim(Ls_xmts)+"%%"+&
trim(Ls_xmje)+"%%"+trim(Ls_zfbl)+"%%"+trim(Ls_dffbz);
CASE 2
Prescription2 = Prescription + trim(Ls_lsxh)+"%%"+trim(Ls_jzlx)+"%%"+trim(Ls_tybz)+"%%"+trim(Ls_lbbz)+"%%"+&
trim(Ls_xmzxbh)+"%%"+trim(Ls_xmyybm)+"%%"+trim(Ls_xmyymc)+"%%"+trim(Ls_xmyygg)+"%%"+trim(Ls_xmyydw)+&
"%%"+trim(Ls_yzrq)+"%%"+trim(Ls_ysxm)+"%%"+trim(Ls_xmdj)+"%%"+trim(Ls_xmsl)+"%%"+trim(Ls_xmts)+"%%"+&
trim(Ls_xmje)+"%%"+trim(Ls_zfbl)+"%%"+trim(Ls_dffbz);
CASE ELSE
Prescription3 = Prescription + trim(Ls_lsxh)+"%%"+trim(Ls_jzlx)+"%%"+trim(Ls_tybz)+"%%"+trim(Ls_lbbz)+"%%"+&
trim(Ls_xmzxbh)+"%%"+trim(Ls_xmyybm)+"%%"+trim(Ls_xmyymc)+"%%"+trim(Ls_xmyygg)+"%%"+trim(Ls_xmyydw)+&
"%%"+trim(Ls_yzrq)+"%%"+trim(Ls_ysxm)+"%%"+trim(Ls_xmdj)+"%%"+trim(Ls_xmsl)+"%%"+trim(Ls_xmts)+"%%"+&
trim(Ls_xmje)+"%%"+trim(Ls_zfbl)+"%%"+trim(Ls_dffbz);
END CHOOSE
J++
LOOP
CLOSE SFMX;
IF J < 10 THEN
lpData[1] = "$$~~~~~~" + ls_zyhm + "~~" + char(j) + "~~" + Prescription
ELSEIF J < 20 THEN
lpData[2] = "$$~~~~~~" + ls_zyhm + "~~" + char(j - 10) + "~~" + Prescription2
ELSE
lpData[3] = "$$~~~~~~" + ls_zyhm + "~~" + char(j - 20) + "~~" + Prescription3
END IF

FOR K = 1 TO 3
IF ISNULL( lpData[k] ) = FALSE THEN
li_Rtn = f_UserBargaingApply(33,uniquelytradeid,lpData[k],lpMessage,ls_data2)
///////
lpMessage = of_dataunwrap(lpMessage) //数据解包
of_checkout(lpMessage,Ref ls_checkdata)
lpData[i]=lpMessage
if li_Rtn < 0 then
if Upperbound(ls_checkdata) = 6 then
ls_wfbc_zyhlb = ls_checkdata[4]
ls_wfbc_yzlslb = ls_checkdata[5]
ls_wfbc_fylslb = ls_checkdata[6]
elseif Upperbound(ls_checkdata) = 1 then
is_Error = "上传医保数据失败!~n~n" + lpData
return false
end if
if trim(ls_wfbc_zyhlb) <> '' then
of_checkout2(ls_wfbc_zyhlb,ref ls_checkdata2)//分解无法保存的住院号
for h = 1 to Upperbound(ls_checkdata2)
astr_jyxx.outzyhm[i+h-1] = long(ls_checkdata2[h])//将住院号连续封装，避免覆盖
next
end if
if trim(ls_wfbc_yzlslb) <> '' then
of_checkout2(ls_wfbc_yzlslb,ref ls_checkdata2)//分解无法保存的医嘱流水号列表
for h = 1 to Upperbound(ls_checkdata2)
astr_jyxx.outyzls[i+int(j/10)+1+h-1-1] = long(ls_checkdata2[h]) //将医嘱流水号连续封装，避免覆盖
next
end if
if trim(ls_wfbc_fylslb) <> '' then
of_checkout2(ls_wfbc_fylslb,ref ls_checkdata2)//分解无法保存的费用流水号列表
for i = 1 to Upperbound(ls_checkdata2)
astr_jyxx.outfyls[i+int(j/10)+1+h-1-1] = long(ls_checkdata2[i])//将费用流水号连续封装，避免覆盖
next
end if
end if
choose case li_Rtn
case -1
is_Error = "上传医保数据失败!~n~n" + lpData
return false
case -2
is_Error = "上传医保数据失败!至少有一个住院号由于不在住院中而校验失败~n~n" + lpData
return false
case -3
is_Error = "上传医保数据失败!至少有一条费用明细不能保存~n~n" + lpData
return false
end choose
if li_Rtn<0 then
is_Error = "上传医保数据失败!~n~n" + lpData
return false
end if
///////
END IF
NEXT
NEXT
RETURN True

查看Oracle的执行计划一句话命令 oracle应用程序实现打包 的方法

评论 (0) All